Tristar WK-3359 Manual De Instrucciones página 9

Parts list.
1. Safety lid
2. ON switch
3. OFF switch
4. Power indicating light
5. Power base with integrated cord storage
6. Spout with scale filter
7. Water level indicator
Operation.
•
Place the appliance on a stable, plain surface.
•
Open the lid by pressing the safety lid as shown
on right picture and fill in the water. Important:
DO NOT fill above "MAX" or below "MIN" mark.
The water level can be controlled through the
appliance's water level indicator.
•
Close the lid and place the appliance onto the power base. Plug in and set the switch to ON
position (I), indicator light will turn on. The jug kettle starts heating up.
•
When boiling, the kettle will automatically switch off, indicator light will go out.
•
To re-boil, simply set the switch to ON position (2) again after a few minutes. You may
interrupt the boiling at any time by switching to the OFF position (3) again.
The appliance is equipped with a safety system and it can automatically switch off. So this can
protect the appliance against accidentally operated without or with not enough water.
Never allow the connector parts to become wet nor immerse the kettle into water. Wipe the unit
only with a damp cloth.
Guidelines for protection of the environment
This appliance should not be put into the domestic garbage at the end of its useful life, but must be disposed of at a central point for
recycling of electric and electronic domestic appliances. This symbol on appliance, instruction manual and packaging puts your attention to
this important issue. The materials used in this appliance can be recycled. By recycling used domestic appliances you contribute an
important push to the protection of our environment. Ask your local authorities for information regarding the point of recollection.