Items Supplied; Device Overview; Before Initial Use - Masterpro BGMP-9133 Manual De Instrucciones

EN

ITEMS SUPPLIED

• Motor unit
• Collecting container
• Protective lid
• Motor shaft with attached blades
• Motor shaft
• Blades
• Stirring insert
• Whisk
• Instruction manual

DEVICE OVERVIEW

9
8
7
6
5
1. Collecting container
2. Blade attachment
3. Whisk
4. Stirring insert
5. Protective lid
ACCESSORIES
Blades
The food can be chopped up with two or four blades as you wish. The food will be chopped up
smaller with four blades.
• For use with four blades, place the blade attachment (2) onto the motor shaft with blades (7) in
such a way that the locking lugs on the blade attachment fit into the re- cesses which are provided
Check the items supplied for completeness and
possible transport damage. If you find any damage to
the components, do not use them (!), but contact our
customer service department.
6. Motor shaft
7. Motor shaft with attached blades
8. Motor unit
9. On / Off switch
03
for them on the motor shaft. Slide it all the way down and turn it anticlockwise a little to fix the blade
attachment in place.
Stirring insert
Use the stirring insert (4) for stirring liquids or whipping cream:
• Place the stirring insert onto the motor shaft (6) in such a way that the locking lugs
on the stirring insert fit into the recesses which are provided for them on the motor shaft. Slide it all
the way down and turn it anticlockwise a little to fix the stirring insert in place.
Whisk
Use the whisk (3) for mixing, whisking and beating egg white, for example:
• Place the whisk onto the motor shaft in such a way that the locking lugs on the whisk
fit into the recesses which are provided for them on the motor shaft. Slide it all the way down and
turn it anticlockwise a little to fix the whisk in place.

BEFORE INITIAL USE

PLEASE NOTE!
1
• Never remove the rating plate and any possible warnings!
• Remove any protective films and stickers that may be present from the device.
• Clean the accessories before you first use them as they may have possible production residues on
them. To do this, follow the instructions in "Cleaning and Storage".
USE
PLEASE NOTE!
2
• Danger of damage from unforeseen events!
– Make sure that the device remains stable during operation. Always hold the motor unit
3 firmly with one hand.
– Do not move the device during use. Always remove the mains plug from the plug socket and allow
the motor to come to a complete standstill before transporting the device.
4
• Do not use the device for longer than 1 minute without interruption. A cooling-down period of 2
minutes must then be maintained.
• Always remove the mains plug from the plug socket before changing accessories.
1. Place the collecting container (1) on a dry, even and firm surface.
2. Connect the motor unit (8) to a plug socket that is properly installed and corresponds with the
technical data of the device.
3. As you require, place the stirring insert (4) or the whisk (3) onto the motor shaft (6) or use the
motor shaft with two or four blades (7, 2) (see the "Device Overview" chapter – "Accessories").
A
4. Place the motor shaft with the accessory you want onto the
receptacle for the motor shaft (A) in the collecting container. Make
sure that it fits correctly.
5. Pour the food to be chopped up / blended into the collecting
container.
IMPORTANT: Do not overfill the device! Make sure that the
maximum fill level (MAX marking) is not exceeded!
04
EN