PURLINE FANY 05 Manual Del Usuario página 4

The fan can be controlled from the remote control or the control panel on the device.
ON/OFF SWITCH On/Off Button, press once on this button in order to turn on the device.
Press again on this button in order to turn off the device.
Fan speed: Use the SPEED buttons to increase
and reduce the speed of the device.
"OSCILLATION" button Press on the OSC button in order to make the device oscillate, in
order to stop the oscillation press again on this button
The two arrows are displayed on the LED screen when oscillation is requested.
"TIMER" button This can function from 1 to 8 hours. Press on this button one time and the
device will function for one hour; press two times and it will function two hours and so on up
to 12 times in order to obtain 12 hours of functioning.
In order to stop the timer, press a thirteenth time.
The LED screen displays the number of hours requested.
"ION" button = Ionizer, press on the ION button in order to obtain this function.
This symbol is displayed on the LED screen when this function is requested.
The device generates Negative Ions that purify the air. In order to stop this function, press
again on the ION button.
"TiO2" button = Disinfection by cold photocatalysis. This method makes it possible to
clean the air of all its bacteria, germs etc.
WARNING: TURN OFF AND UNPLUG THE DEVICE
Use a soft and slightly moist cloth to clean the device. Assure that no moisture penetrates into
the device
Never use chemical products, petrol, abrasive detergents etc. These would damage the fan.
SPECIFICATIONS
Model:
Net Weight:
Oscillation:
Timer:
Electrical consumption:
Voltage:
This data can vary for technical reasons. For more details, please refer to the nameplate
placed on the device.
OPERATION
MAINTENANCE
FANY05
3.8 KG
90°
1 to 8 Hours
48 W
220 / 240V ~ 50Hz