Ec Declaration Of Conformity - SIMALFA G9 2K Manual De Servicio

Table of contents
Explosion drawing
Declaration of conformity
Listing of Replacement Parts
1 General
1.1 Model identification
1.2 Intended use
1.3 Unintended use
2 Technical description
3 Safety instructions
3.1 Identification of safety instructions
3.2 General safety instructions
4 Connecting supply lines and Operation
4.1 Generating a spray pattern test
4.2 Changing the spray pattern
5 Converting / repairing the spray gun
5.1 Changing the material nozzle and air cap
5.2 Replacing the material needle (component A)
5.3 Replacing the Valve component B
5.4 Replacing a leaking needle packing (component A)
5.5 Correcting flaws of spray pattern
6 Cleaning
7 Troubleshooting and fault correction
8 Disposal
9 Technical data
2
21
22
24
24
24
24
25
25
25
25
26
27
27
27
28
28
29
29
30
30
32
32
33
20

EC Declaration of conformity

We, the device manufacturer, declare at our sole responsibility that the product with the
description below corresponds to the relevant based safety and health requirements. In
the event of changes to the device not agreed on with us or if used improperly this
declaration becomes invalid.
Manufacturer
ALFA Klebstoffe AG
Vor Eiche 10
CH-8197 Rafz, Switzerland
Tel. +41 43 433 30 30
Fax +41 43 433 30 33
Email: info@alfa.swiss
www.simalfa.ch • www.alfa.swiss
Type designation Two-component hand spray gun
SIMALFA
Wide jet
Round jet
Purpose of use Processing of sprayable materials
Applied standards and directives
EC Machinery Directive 2006/42/EC
EN ISO 12100
DIN EN 1953
Authorized to compile the technical documentation:
Thomas Simmler, ALFA Klebstoffe, Vor Eiche 10 CH-8197 Rafz, Switzerland
Special notes:
The product is intended to be installed in another device. Commissioning is prohibited
until conformity of the end product with Directive 2006/42/EC has been verified.
Rafz, 08.01.2018
Thomas Simmler
Name:
Position in the company: CEO
This declaration does not represent a promise of properties according to product liability. The safety instructions
of the product documentation must be observed.
G9 2K
®
21
V 11 815
V 11 816