Publicidad
Idiomas disponibles
Idiomas disponibles
6
5
1
2
3
4
6
Scope of supply:
2 x SAS cover 60005022200
1 x Plug 54403135000
Mounting
– Remove the seat
– Remove the left and right spoilers
Removing the tank
Clamp off the fuel line [1], loosen the AH screw [2] and tilt the tank back.
Remove the lock washer and disconnect the gas pressure shock absorber
from the tank.
Detach the two rear retaining screws [3] (left and right) and remove the
tank.
Removing the radiator
Drain the cooling liquid.
Open the radiator cap and remove the drain plug [5]. Now you can remove
the four radiator retaining screws and loosen the spring-loaded band-type
clamp [4] holding the radiator hose on the right side.
Remove the aluminum water pump pipe [6] from the water pump cover.
Publicidad
