Mellerware Petto! Drink Manual Del Usuario página 4

ESPAÑOL
Ensure that the voltage indicated
–
on the rating label matches the
mains voltage before plugging in
the appliance.
Connect the appliance to a base
–
with an earth socket withstanding
a minimum of 10 amperes.
–
mains socket properly. Do not alter
the plug. Do not use plug adaptors.
The appliance must be used and
–
placed on a flat, stable surface.
Do not use the appliance if the
–
cable or plug is damaged.
If any of the appliance casings
–
breaks, immediately disconnect the
appliance from the mains to prevent
the possibility of an electric shock.
Do not use the appliance if it has
–
visible signs of damage or if it has
a leak.
Do not touch the plug with wet
–
hands.
To prevent the pet from falling on
–
the appliance, it is recommended to
place it in a corner or against the
wall. The power cord should be
placed as concealed as possible to
prevent the pet from damaging the
equipment by chewing on the cord.
USE AND CARE
Fully extend the appliance's power
–
cable before each use.
Do not use the appliance if its
–
accessories are not properly fitted.
Do not move the appliance while
–
in use.
Do not use the appliance if it is
–
tipped up and do not turn it over.
Store this appliance out of reach
–
of children and/or persons with
physical, sensory or reduced
mental or lack of experience and
knowledge.
Service
Any misuse or failure to follow the
instructions for use renders the
guarantee and the manufacturer's
liability null and void.
Description
A – Water fountain
B – Water tray
C – Main body
D – Water level indicator / LED light
E – Cable charger
F – Adaptor
G – Water filter
Instructions for use
USE
Place the water pump in the water
–
tank, as indicated in the following
photos.
It is important to place the water
–
pump in this position, to easily
reach the pump adjustment button.
The intensity of the water pump
–
can be modified.
– Pass the cable through the channel
to the outside.
EN ES