Aqua Glass Covi 39884 Manual De Instalación página 4

WALL SET INSTALLATION (Continued)
3. Prepare for Plumbing Fixtures
Y
X
◘
Measure and mark location for plumbing fixtures on back
of side panel.
◘
Using proper size hole saw, cut out plumbing fixture holes.
5. Install Plumbing Side Panel
 APPLY ADHESIVE 1/4" to 3/8" round bead to back of side
panel with plumbing fi xture holes.
TIP: Cover bathtub to protect from adhesive that may

drip.
◘
Press and tape plumbing side panel to wall.
IMPORTANT! If using solvent-based adhesive, apply
adhesive to drywall using caulk gun.
4. Install Wood Support Boards
Drill holes
from back.
Y
X
◘
Install 1" x 3" wood support boards on back of both side
panels.
 APPLY ADHESIVE
attach boards.
6. Install Remaining Panels
 APPLY ADHESIVE
remaining panels.
◘
Position remaining panels as shown in step 2, with one
side wall in place and back wall diagonal out over bathtub.
◘
Push back wall and side wall into place at same time.
IMPORTANT!
adhesive to drywall using caulk gun.
4
Back of panel
in recess cavity of each side panel and
Back
panel
Left side
panel
1/4" to 3/8" round bead to back of
If using solvent-based adhesive, apply
P/N 27760 5/11
Right side
panel
Top view