Aqua Glass Covi 39884 Manual De Instalación página 5

WALL SET INSTALLATION (Continued)
7. Allow Adhesive to Dry
◘
Press and tape each panel to wall.
◘
Install temporary braces to panels tight against drywall
while adhesive dries.
◘
Protect surface of wall set where it will contact brace.
 CAUTION: Brace should be placed on wall studs to
prevent wall panel defl ection.
IMPORTANT! Follow manufacturer's instructions for
adhesive dry time before removing tape.
8. Apply Sealant
◘
Remove tape.
 APPLY SEALANT to all seams.
◘
Make connections to water supply lines and check for
leaks.
IMPORTANT! Follow manufacturer's instructions for
sealant dry time before use.
5
P/N 27760 5/11