Flash Time Setting; Customizable Labels - Intelbras TH 10 Guia De Instalacion

next, press * or # until selecting the desired ring
type;
to conclude, press the programming key again.
Note: If you have a PABX connected to the TH10,
it is recommended that you configure it for long
ring, that is, 1 s of ring and 4 s of pause.

Flash time setting

To change the flash time, keep the phone on the
hook and follow this procedure:
press FLASH/SET programming key once;
press keys 3 1;
next, press * or # to select the desired flash time;
to conclude, press the programming key again.
Note: The following flash times are available, for
setting: 90, 95, 100, 120, 180, 300, 600 and 1000
ms. Default flash time is 300 ms.
24

Customizable labels

Label making files are available at:
www.intelbras.com