Doro HearPlus 325a Manual De Instrucciones página 14

English
Installation
General
This multifunctional assistive listening device consists of two units. One transmitter unit that intercepts the sound
at its source and transmits it via a wireless digital channel (Bluetooth) to the receiver unit. The use of transmitter
and receiver units effectively reduces other unwanted sounds from the surroundings. It is simple to place the
transmitter by e.g. a radio, TV or other equipment and then you are able to adjust the sound volume in the receiver
without needing to adjust the source.
The receiver unit can also be used with other Bluetooth-compatible audio equipment (e.g. mobile phone, computer).
The Bluetooth function does not work in the same way on all equipment, which may mean that the headset will
not work correctly with all types of equipment.
The receiver unit can be registered to the transmitter unit and to a mobile phone at the same time.
Connection
1. Connect the mains adapter supplied to the electrical socket.
2. Connect the mains adapter to the charging socket in each unit and charge for at least 4 hours (the charging
indicator will go out when the battery is fully charged).
3. Register the receiver as detailed in the Registration section.
Registration
The receiver unit is registered automatically to the transmitter, but must be registered manually to the mobile
phone with which it is to be used. The automatic registration occurs when you turn on the units at about the same
time (the indicator will flash briefly).
Using with mobile phone shows you how to register/pair with a mobile phone.
Turning Off/On
Turn the units off by moving the 0/I control to the I position.
Turn the units on by moving the 0/I control to the 0 position.
Volume control
The volume can be adjusted during use by moving up or down. Move the control up or down a number of
times to turn the volume up or down.
14