Publicidad
Step 13 - Attaching the Leg Assemblies to the Bottom Trim and Top Support Rail.
• Attach the leg assemblies (O and P) to the bottom trim (L) and the top support rail (M), as shown.
• Tighten cams (3) by turning them clockwise approximately a half turn or until snug. DO NOT OVERTIGHTEN!
4
x 4
Back
P
O
L
M
P
4
M
unfinished edge
4
(800) 892-3986
IS92230-I3
Pg 14 of 44
Publicidad
