Publicidad
Step 14 - Attaching the Top assembly to the Bottom assembly.
• Attach feet (20) to the legs, as shown. NOTE: If necessary, lightly tap the foot (20) with a hammer.
• Carefully lay the cabinet body over and lay face up on the floor.
• Insert dowels (4) into the middle shelf (D), as shown.
• With the bottom trim (L) facing up, carefully attach the leg assembly to the middle shelf (D), as shown.
• Tighten all cams (3) by turning it clockwise approximately a half turn or until snug. DO NOT OVERTIGHTEN!
4
x 4
top assembly
20
x 4
D
bottom assembly
L
M
D
Back
20
4
2
U
20
4
(800) 892-3986
IS92230-I3
Pg 15 of 44
Publicidad
