Descargar Imprimir esta página

GM 23468995 Instrucciones De Montaje

Chevrolet corvette 2015-2019

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Floor Liners
General Motors strongly recommends that you use only floor liners
designed specifically for the model and model year of your vehicle, and
that they are properly installed and secured.
Kit Contains:
1 Front Driver Floor Liner
1 Front Passenger Floor Liner
1 Rear Driver Side Floor Liner
1 Rear Passenger Side Floor Liner
For the 4 piece kit, part number 84204785, Follow steps 1 thru 11
For the 2 piece kit, part number 84251283, Follow steps 1 thru 7
Instructions:
1.
Move front seats to the full rearward position. See Figure 1.
2.
Remove production floor mat. See Figure 2.
3.
Vacuum the floor after the carpet is removed to make sure it is
clear of debris. See Figure 3.
4.
Install the floor liner front edge first, making sure the front edge
is underneath the gas and brake pedal. See Figure 4.
5.
Set the liner in the floor with the retainers in the liner aligned
with the attachment features in the floor. See Figure 5.
6.
Check the operation of the accelerator, brake, and clutch (if
applicable) pedals to assure that the floor mat does not interfere
with them. Check to make sure the retainers are engaged. See
Figure 6. Repeat steps 1 thru 4 for the front passenger liner.
7.
Move front seats to full forward position. See Figure 7.
8.
Remove the production mat from the rear driver and passenger
side. See Figure 8.
9.
Vacuum the floor after the carpet is removed to make sure it is
clear of debris. See figure 9.
10. Install the driver rear liners makeing sure it is flat on the carpet
and under the seat track. Push down to fully engage the
interlocking feature attaching the rear driver and passenger liner.
See Figure 10.
11. Check to make sure the liners are fully seated on both sides and
the locking feature is engaged. See Figure 11.
FIGURE 1
FIGURE 3
Floor Liners
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE
WITH GM SPECIFICATIONS.
FIGURE 2
FIGURE 4
AUTH
REVISION
FIGURE 5
FIGURE 7
FIGURE 9
FIGURE 11
REV 14FE17
PART NO.
INSTALLATION INSTRUCTIONS
DR
TITLE
23468995
PART NO.
FIGURE 6
FIGURE 8
FIGURE 10
23468995
SHEET
Floor Liners
1
SHEET
1
3
OF
3
OF

Publicidad

loading

Resumen de contenidos para GM 23468995

  • Página 1 TITLE ABOVE BORDER TO BE PRINTED Floor Liners EXACTLY AS SHOWN ON 8.5 x 11 WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. 23468995 PART NO. TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.
  • Página 2 TITLE ABOVE BORDER TO BE PRINTED Floor Liners EXACTLY AS SHOWN ON 8.5 x 11 WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. 23468995 PART NO. TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.
  • Página 3 TITLE ABOVE BORDER TO BE PRINTED Floor Liners EXACTLY AS SHOWN ON 8.5 x 11 WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. 23468995 PART NO. TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.