Prepare For Cooking - Kasanova PRO MID000001NOC Manual Del Usuario

ELECTRIC PRESSURE COOKER
28
Disassemble
Pull it out upwards
Seal ring
Use and maintain the stainless inner pot
•
Do not empty
It may cause yellowish and spotted inner pot or distorted bottom if it is empty for a long
time.
•
Do not use it to store the acid, alkali and preserved foods for a long period
Although the inner pot has excellent anti-corrosion performance, it may cause corrosion
of certain degree, the suggested time of keep warm shall not exceed 2h.
•
Keep it clean to prolong the service life
Do not immerse it in water for a long period.
Clean the inner pot with soap, mild detergent or warm water to remove dust, oil and dirt.
•
Do not use a metal shovel or other hard tool, otherwise it will damage the inner
surface of pot.
TIPS:
The bright inner pot has smooth and polished surface before use. After using for a long
period, the surface will become unclear with signs after it is washed with hard object. It is
normal and won't influence the function of the product.
(User shall read this function selectively according to the product model and configu-
ration.)

PREPARE FOR COOKING

1 Opening the lid correctly
•Hold the handle of upper cover, turn it anticlockwise for about 30°till the "
the edge of the upper cover aiming at the "
and then lift the upper cover.
2 Check if the parts and accessories of lid are well installed
•Check if the floater valve and exhaust valve
are jammed, confirm if the sealing ring and block proof cover are well installed
3 3. Take out the inner pot, put the foods and water into the inner pot
•The total amount of foods and water shall not
exceed the Max marked on the inner pot.
·•The max rice and water amount when cooking shall not exceed the Max on the inner pot.
4 Put the inner pot into the cooker
•Wipe to clean the external surface of inner pot, foreign object and water are not allowed
Disassemble and install the seal ring
Press it down to install
Install
1.Please do not pull the seal ring, otherwi-
se, the distorted seal ring may influence
2.Do not use the damaged seal ring,
please replace it at the authorized repair
" mark on the edge of the housing cover,
the seal and pressure effect.
office.
" mark on