Technical Data - Overkiz Hattara DIN Rail MR-WIFI Guia De Inicio Rapido

Hattara DIN Rail
®
CONFIGURATION
- Refer to the user guide for the smartphone app for all information on pairing a product.
- Also refer to the user guide of the product to be piloted to configure it.
INTERFACE
The indicator light provides information .
In normal operating mode
Fixed green : The module has started.
Off : The product is not supplied with power. Check the wiring.
If the wiring is correct but the product is still off, please contact the customer service.
The action button is not used for the moment.

TECHNICAL DATA

- Consumption in normal operating mode:5V
- Impact protection rating: IK07.
- Operating temperature -10°C to 40°C.
- Maximum operating altitude: 2,000m.
- Pollution category: Class 2.
- Operating humidity: between 5% and 90%.
- Dimensions (l x w x h) 27x90x58mm.
- Plastic housing: PC V0.
- Frequency used and maximum power used: 2.4000 GHz - 2.4845 GHz/erp < 100 mW.
RECYCLING AND DECLARATION OF CONFORMITY
Do not dispose of this product with the household waste. Please take it to a collection point or
an approved centre to ensure it is recycled correctly. Hereby, Overkiz declares that the radio
equipment type 2 is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity
http://legal.overkiz.com/DoC/DIN-RAIL-WIFI-DoC.pdf.
SYMBOLS AND DESCRIPTION
CE label
Consult the CE guide
Disposal of waste electrical and electronic equipment (WEEE). This symbol indicates that
used batteries and electronic equipment must not be disposed of with the household waste
but collected separately.
Direct current
MR-WIFI module
500mA (0.5A)
is available at the followinginternet
EN
Allée de la Mandallaz - Immeuble Variation A
74370 METZ-TESSY - FRANCE
Illustration
BOX CONTENTS
1 x MR-WIFI
1x interconnection
cable
PRODUCT DESCRIPTION
address:
DIN rail
mounting
fastening clips
1 x DIN Rail 1 x installation guide
mounting
1 x aerial
Bridging connectors for
additional modules
Aerial connector
Location of the
marking label
Status indicator
Actions button
Connector for
the CU module
5