Listening To Each Programme Source In Its Registered Dso; Source Sound Memory (Ssm); Selecting The Spectrum Analyzer - Sony CDX-C8000RX Manual De Instrucciones

3
Select the desired frequency and level.
1 Press either side of (SEEK/AMS) to
select the desired frequency.
Each time you press (SEEK/AMS), the
frequency changes as follows:
62 Hz y 78 Hz y 99 Hz y 125 Hz y
157 Hz y off
2 Press either side of (DISC/PRST) to
adjust the desired volume level.
The volume is adjustable by 1 dB steps
from –12 dB to +12 dB.
4
Press (MENU) twice.
After the frequency setting is complete, the
display returns to the normal playback
mode.
Listening to each
programme source in its
registered DSO

— Source Sound Memory (SSM)

Each time you return to the same source, you
can hear the same DSO menu and equalizer
curve registered for that source, even after
changing the programme source or turning the
unit off and then on again.
34
Selecting the spectrum
analyzer
The sound signal level is displayed on a
spectrum analyzer. You can select a display
pattern from 1 to 6, or the automatic display
mode.
Mode Display patterns
SA 1
SA 2
SA 3
SA 4
SA 5
SA 6
off
Cancel
All of these display patterns
SA Auto
appear one by one automatically.
1
Press (SOURCE) to select a source (tuner,
CD, or MD).
2
Press (MENU).
3
Press either side of (DISC/PRST)
repeatedly until "SA" appears.
4
Press (+) side of (SEEK/AMS) repeatedly
to select the desired setting.
Each time you press (+) side of
(SEEK/AMS), the setting changes as follows:
B SA 1
SA Auto b
5
Press (ENTER).
B ... SA 6
SA off b