Temperature Mode; Timer; Switching Off - Caso Vario Power 3400 Magenta Manual Original

14.4.4

Temperature Mode

• Press the Function Key 2. to select the temperature. The preset
temperature stage "120°C" is selected and the device turns on.
• With the + / - keys, you can change the settings at any time in a range
from 60 – 240°C. (Temperature stages: 60, 70, 80, 90, 100, 120, 140,
160, 180, 200, 220 and 240°C)
► In case of grilling or cooking deep fry food we would advise you to use
the function "Temperature" as in this case you can use temperatures up
to 240°C. Otherwise the overheating protection "E05" will be activated.
14.4.5

Timer

• Timer Function. After the selection of the temperature mode press the
button Time 4. until the corresponding control lamps blink. The display
shows the number "0". With +/- keys, you can now select the operating
time in 1-minute intervals (up to max. 180 minutes). Once the time is
up, an acoustic signal sounds and the device automatically goes into
standby mode.
► During timer operation, you can change the duration at any time with
the +/- keys. With the memory function of the device, the power stage or
temperature settings remain unchanged here.
14.4.6

Switching Off

• When you switch off the device via "On/Standby" and the temperature
of the cooker plate surface is lower than 50°C, the display shows „L".
When the temperature of the cooker plate surface is over 50 °C, it is
displaying „H".
► Do not place any empty cookware on the ceramic field. Heating an
empty pot or pan activates the overheating protection and the device
turns off.
► Do not operate the device if it is damaged in any way or does not
function properly.
► The use of accessories and spare parts not recommended by the
manufacturer may lead to damage on the device and injuries.
caso Vario Power 3400 Magenta
Please note
Please note
48