Set The Sleep Timer - HANNspree SG4311 Guia De Inicio Rapido

•
Press or
•
Press to go to the next field.
Using the Snooze Key
Press the Snooze key to reset the alarm and will sound again after
3 minutes.
Note: Pressing the Snooze key does not turn the alarm off. Use the Alarm
Switch to turn off the alarm.
Turn ON / OFF the Alarm
The Alarm Switch is located at the rear of the Photo Alarm Clock.
•
Set to OFF position to turn off the Alarm.
•
Set to ON position to enable the Alarm function.
Setup
Use the Setup menu to adjust the basic clock settings.
1. Press to display the main menu.
2. Press or to select Setup, then press
3. Press or , then
•
Alarm Tone: Select the alarm sound of your choice: Alarm 1,
Alarm 2, Alarm 3, User (user-defined music file), or FM Radio.
•
Language: Set the on screen display (OSD) language.
•
Clock Mode: Set the clock to12-hour or 24-hour mode.
•
Auto Lighting: Set auto lighting to ON or OFF.
Note: When the backlight turns off, use the Snooze key to turn backlight
• Low • Medium
•
Reset: To restore the factory default settings.
4. Press or to adjust setting.
5. Press to apply setting and close submenu.
Sleep
Use the Sleep menu to turn the LCD display OFF after
a specified time.

Set the Sleep Timer

1. Press to display the main menu.
2. Press or to select Sleep, and press
3. Press or to select option.
Options are:
•
Off: The display is always enabled.
•
30 minutes
•
90 minutes
to adjust the time earlier or later.
to select options to adjust. Options are:
• High
2
.
• Off
to accept option.
•
10 minutes
•
60 minutes