Publicidad
Idiomas disponibles
Idiomas disponibles
10. Trouble shootings
TROUBLES
REASONS POSSIBLE
No breeze, no
A.
mist
B.
C. Water level of the groove is
D. Leakage of the water tank.
Breeze, but
A.
no mist
B.
C. The temperature of the unit is
Odd mist
Water in the tank is kept for too
smell
long.
Low intensity
A.
B.
C. Scale sediments on the
D. The water is too cold.
E.
Mist spurts no
A.
high
B.
C. Fan does not work properly.
Noise
A.
B.
No power supply.
Power switch is off.
too high.
No water in the water tank.
Water level detector is not in
the right position.
too low.
Too much water in the water
groove.
Mist intensity controller is on
the minimum side.
transducer.
The water is not clean.
Mist intensity controller is on
the minimum side.
Water tank and the base are
not rightly touched.
Resonance caused by too
less water in the water tank.
Resonance caused by
unstable surfaces.
SOLUTIONS
A.
Connect to power supply.
B.
Turn on the power switch.
C. Lower the water level by
reducing water in the groove.
D. Tighten the water lid.
A.
Fill water into the water tank.
B.
Re-mount the water level
detector.
C. Place the unit in a room for
half an hour before use.
Clean the water tank and re-fill it
with clean water.
A.
Empty the water in the groove
and place the water tank
again.
B.
Adjust the controller.
C. Clean the transducer
D. Use water of ordinary
temperature.
E.
Clean the water tank and re-fill
it with clean water.
A.
Adjust the controller.
B.
Make sure water tank and the
base are touched rightly.
C. Ask professionals to check the
fan inside the base.
A.
Add water into the water tank.
B.
Lay the unit on stable
surfaces.
22
Publicidad
