Configuring Pdlgfu15 - Pacific Crest PDLGFU15 Guia Del Usuario

Pacific Crest - PDLGFU15 User's Guide 5

Configuring PDLGFU15

The PDLGFU15 is configured by Pacific Crest's PDLCONF
software. Configuration parameters define the DTE interface and the
over-the-air protocol. Depending on the application you may need to
change the factory default settings*.
Up to 16 frequencies are stored in the configuration memory called the
frequency table. Use Pacific Crest software PDLCONF for
selecting the frequency of operation or use the Leica Geosystems data
collector. Note that the frequency tables are field upgradeable.
*Helpful Tip: Upon receiving your PDLGFU15 radio modem use PDLCONF to print and
document the PDLGFU15 default settings. If radio configurations are corrupted in the field,
refer to your archived settings to trouble shoot and res tore proper radio configuration settings.