V-TAC VT-5522 Manual Del Usuario página 14

6. Fault detected mode
Failure alarm function of indicator light and solution
Flicker
No.
frequency
1 2
The collision is
2 3
abnormal
The floor detector is
3 4
invalid
The sound of the side
4 5 brush current flow is
loud
The current flow of left
5 6
wheel is abnormal
The current flow of right
6 7
wheel is abnormal
Problem
1. Check if the collision cover is stuck;
2. The collision switch is abnormal;
3. The mainboard collision is abnormal.
1. Check if there is foreign object in or out of the floor detector cover;
2. The floor detector wire has come off;
1. Check if the side brush is entangled or stuck by a foreign object;
2. The side brush motor is abnormal.
1. Check if the wheel is entangled or stuck by a foreign object;
2. The motor wire has come off;
3. The motor is abnormal.
1. Check if the wheel is entangled or stuck by a foreign object;
2. The motor wire has come off;
3. The motor is abnormal.
Solution
14