Controlling the salt level
Depending on the model,
.
dishwashers will have a
manual or electronic salt
level control.
MANUAL REGULATION
If there is a salt regulator like the one
shown in the photographs (Mod. A-
B) inside your dishwasher on the right-
hand side, turn it to the number that
corresponds to the hardness of the
water in your area (see table).
To turn it to the correct position, use a
coin (Mod. A) or a screwdriver (Mod.
B).
If you wish to use combined detergent tablets (3-in-1, 4-in-1), turn the dial to the
corresponding test result number. If you use traditional detergents after this, turn the
dial to the test result number again.
ELECTRONIC ADJUSTMENT
If your dishwasher has a salt dial
on the inner right hand side like
the one shown in the
photographs (Mod. C), this
means your dishwasher has an
electronic salt regulator and the
salt is adjusted via the control
panel.
Press and hold down the
a
Short Wash button for
three seconds. The value
will appear on the display
(fig. 1). On some models
there will be a letter "L"
before it (fig. 2).
Press the Short Wash
b
button again to select the
position required on the salt
dial.
Press the Start button to
validate the selection (see
c
pages 69-70).
This simple adjustment of your dishwasher is vital
for its correct functioning. Do not ignore it.
REGULATOR Model A
REGULATOR Model C
1
2
English
REGULATOR Model B
REGULATOR Model C
1
L2
2
61