4
SELECTING ADDITIONAL FUNCTIONS
Wash functions must always be selected after the wash programme has been selected. If the
programme is changed during the selection, the previously selected functions are
cancelled. These functions make it possible to adjust the wash load, times and consumption to
a maximum.
The additional functions available depend on the model:
Button: Time delay
Press the time delay button
to delay the start of the
wash programme.
E and G models (see pag.
69): washing can be
delayed by up to 9 hours.
B models (see pag. 68):
up to 19 hours.
C models (see pag. 68):
up to 24 hours.
Key: Eco +
This option lowers the
washing temperature. This
saves more energy. It can
be activated programmes
Eco, Normal and Auto.
ECOLOGICAL WASHING
If the model has an Eco-Sensor, you can save 25% water with the Intensive or Normal
programme. The Eco-Sensor detects how dirty the pre-wash water is and, if it is clean
enough, it reuses it in the wash.
Button: Time
reduction
This reduces the wash and
dry times. This option can
be used with Intensive,
Normal, Automatic,
Hygienizer and Economy
programmes.
Button: Top/bottom
load
Only half the dishwasher
capacity is used. Top load,
in the top rack, for more
delicate utensils, and Bo-
ttom load, in the bottom
rack, for saucepans or very
dirty utensils.
Button: Extra drying
This gives better drying
results. It can be used with
all programmes except the
pre-wash and economy
programme.
4 in 1:
Select this additional
option when using
combined washing
products (4 in 1, 3 in 1...).
Models with programme
selector dial.
Turn the dial to the icon and
leave it in this position for
at least 2 seconds, until you
hear the confirmation beep
and the corresponding pilot
light switches on or off.
Screen models.
Press the time delay button
and the top load/bottom
load button simultaneously
and hold them down for at
least 2 seconds, until you
hear the confirmation beep
and the corresponding pilot
light switches on or off.
Button: Express (top)
For extra-quick washes:
slightly dirty utensils in the
top rack.
I M P O R T A N T
If a change of programme
is made while additional
functions are being
selected, the functions
that are not compatible
with the new programme
will be cancelled.