Safety Instructions; General Safety Guidelines - VATECH EzRay Air Manual Del Usuario

2.

Safety Instructions

2.1

General Safety Guidelines

Mode of operation: Continuous operation with intermittent loading 30 times the

exposure time wait before next exposure can begin.
This equipment is designed and manufactured to ensure maximum safety of

operation. Operate and maintain it in strict compliance with the safety precautions
and operating instructions contained in this manual.
This equipment must only be operated by legally qualified persons.

Observe all local fire regulations. Always keep a fire extinguisher near the

equipment.
The equipment must be installed, maintained, and serviced by qualified service

personnel according to the procedures and preventive maintenance schedules.
Only battery replacement can be performed by users.
Ensure that the on/off switch is set to off when the equipment is not in use.

Always disconnect the power supply before cleaning the equipment.

DO NOT keep the equipment or its parts in a humid place or a liquid substance.

Avoid placing the equipment near chemical storage and gas-filled storage

facilities.
This equipment is shipped with the backscatter shield attached (firmly fixed), so

the backscatter shield cannot be replaced by users. If it is damaged or defective,
contact your Service Representative for replacement.
The backscatter shield protects users from backscatter radiation that they might

be exposed during X-ray exposure. Operating the equipment with the backscatter
shield allows the users to be exposed to less radiation compared to when
operating without.
EzRay Air (Model: VEX-P300) User Manual
2. Safety Instructions
7