Optional Accessories - Makita DVC260 Manual De Instrucciones

Replace the filter bag when it becomes full. Open
3.
the lid and take out the filter bag. Pull the strip on the
side of the opening to shut the filter bag and dispose of
the filter bag in whole.
► Fig.28: 1. Strip
When using a dust bag (optional accessory), take out the
dust bag and dispose of the dust by releasing the latch.
► Fig.29: 1. Latch
Periodically check the filter bag if it is
NOTICE:
full. Continuous use with the filter bag full results in
reduced suction power.
Do not use an used filter bag. The filter
NOTICE:
bag is designed for single use. If you want to use the
bag repeatedly, use a dust bag (optional accessory).
MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
Cleaning the HEPA filter
CAUTION:
Do not use the vacuum cleaner
without a filter or continue to use dirty or dam-
aged filter. Vacuumed dust or particles may be
exhausted from the cleaner and they may cause
respiratory disease to the operator.
NOTICE:
To keep optimum suction power and
clean exhaust, clean the filter periodically. If
enough suction power is not obtained even after
the cleaning, replace the filter with new one.
To prevent the filter from being dam-
NOTICE:
aged, do not use following tools and similar items
for cleaning :
Air duster
—
— High pressure washer
— Tools made of hard materials such as a
metallic brush
Open the lid and take out the filter bag. Release
1.
the hook on the filter and remove it from the vacuum
cleaner body.
► Fig.30
Beat the dust off from the filter. The filter can be
2.
washed with water. Rinse away the dust and particles
on the filter every 1 or 2 month. After that, dry the filter
completely in a shaded and well-ventilated place to
prevent unpleasant odor or malfunctions.
To install the filter, insert the side without the flap
3.
into the holder then push the filter downward until the
flap is secured by the rib.
► Fig.31: 1. Holder 2. HEPA filter 3. Rib 4. Flap
Cleaning the dust bag
Regularly clean the dust bag with soap and water. Turn
the dust bag inside out and remove the sticky dust.
Wash lightly by hand and rinse well with water. Dry
completely before installing to the vacuum cleaner.
► Fig.32
NOTICE:
Wet dust bag lowers the vacuuming per-
formance as well as the life of the motor.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Hose (for vacuum cleaner type)
• Hose (for dust extraction type)
• Extension wand
• Free nozzle
• T-shape nozzle
• Nozzle for carpet
• Corner nozzle
• Nozzle assembly
• Shelf brush
• Round brush
• Straight pipe
• Bent pipe
• Filter bag
• Dust bag
• Front cuff
• HEPA filter
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
13 ENGLISH