Teac UD-501 Manual Del Usuario página 9

A
Analog audio output connectors
(LINE OUT)
These are a two-channel analog audio output pair.
Connect these XLR connectors and RCA jacks to ste-
reo amplifiers or powered speakers.
Use the included cables or commercially-available
cables to make these connections.
XLR: Balanced XLR cables
RCA: RCA audio cable
Connect the R connector of this unit with the R
connector of the amplifier. Likewise, connect the L
connector of this unit with the L connector of the
amplifier.
White (L)
Red (R)
B
USB input connector (DIGITAL IN)
Use to input digital audio from a computer. Connect it
to a computer's USB connector.
Use a commercially available USB cable for connection.
CAUTION
Before connecting a computer that is running
a Windows OS, you must install the dedicated
driver on the computer (page 13).
Proper connection is not possible with a com-
puter that does not have this driver installed.
C
RCA coaxial digital audio input connectors
(DIGITAL IN)
Use these to input digital audio. Connect the coaxial
digital audio output jacks of digital audio devices to
them.
Use commercially available RCA coaxial digital cables
to make the connections.
D
Optical digital audio input connectors
Use to input digital audio. Connect the optical digital
audio output connectors of digital audio devices to
them.
Use commercially available optical digital cables to
make the connections.
E
AUTO POWER SAVE switch
Use to turn the automatic power saving function ON
and OFF. When ON, the unit will automatically enter
standby mode if there is no digital input for 30 min-
utes or more.
White (L)
Red (R)
F
Power inlet (~IN)
Insert the included power cord here. After complet-
ing all other connections, insert the power plug into a
power outlet.
Unplug the cord from the outlet when not using the
unit for a long time.
V Use only the included power cord. Use of a differ-
V Do not turn the power on until after
o To turn the power on again when in standby mode,
press the MENU button, turn the INPUT SELECTOR
knob or shift the POWER switch to OFF once and
then back to ON.
o Wait a few seconds after shifting the POWER switch
to OFF before shifting it back to ON.
ent cord could cause fire or electric shock.
making all connections.
o Carefully read the manuals of the devices that
you are connecting and follow their instructions
when making connections.
o Do not bundle connecting cables with power
cords. Doing so could cause noise.
o Connect all plugs completely.
EN
9