1. Slowly pull out the water bucket.
• Hold the appliance firmly and pull out the
bucket by the handles on both sides of the
bucket, being careful not to spill any water.
• Carry a full bucket carefully by the bucket
handle.
2. Pour out the water.
3. Push the water bucket gently all the way in.
• Failing to push the bucket securely may cause the
appliance to stop operating.
4. When the bucket is put back, the appliance will start operating. The indicator light
NOTE: Never drink the water or use it to water plant.
Continuous drainage:
If the appliance is to be operated for long periods but you are unable to empty the bucket, it is
recommended to use the continuous drain facility.
1. Open the cover on the side of the appliance.
2. Unscrew the drain cap and then remove the rubber plug.
3. Fasten a hose (not supplied) with a diameter of 16 mm to the drain outlet.
4. Make sure that the hose is not higher than the outlet, otherwise water will remain in the bucket. Also
check that the hose is not kinked.
will go out.
EN-9