Setting The Timer - Aerian ADH20EC Manual Del Usuario

Quiet mode
Repeatedly press
quiet mode.
In this mode, the appliance will automatically select the comfortable humidity level and operate at the low
fan speed.
Dry mode
Repeatedly press
indicating that the appliance is in the dry mode.
The fan speed is fixed and cannot be adjusted. The humidity level will
be automatically controlled according to the ambient humidity.
Tips for drying wet cloths:
Allow a 30‐50 cm gap between the air outlet and any clothing.
To allow good airflow, line the wet clothes up and leave space between each garment.
Hang wet thick clothing directly in front of the air outlet. The optimal drying performance may not be
obtained for thick and heavy clothing.
Setting the Timer
To program the delayed start function:
1. When the appliance is in the power off state, press
• The indicator light
2. While the hour is displaying, repeatedly press or press&hold
• The delayed start time will be changed by 1‐hour increments up to 24 hours.
3. After a few seconds the set time will be confirmed and then disappear from the display.
4. When the set time has elapsed, the appliance will start working.
To program the delayed stop function:
1. When the appliance is in the power on state, press
• The indicator light
2. While the hour is displaying, repeatedly press or press&hold
• The delayed stop time will be changed by 1‐hour increments up to 24 hours.
3. After a few seconds the set time will be confirmed and then the display will return to the ambient
humidity level.
until the indicator light
until the indicator light
will illuminate and the display will show the hour.
will illuminate and the display will show the hour.
illuminates, indicating that the appliance is in the
illuminates,
.
to set the desired hours.
.
to set the desired hours.
EN-7