MAIN MENU
After turning on the device you will automatically arrive at the main menu.
Note: If a memory card and/or USB stick has been inserted in the device, the device will automatically display the photos on your memory
device after a short pause and may or may not start a slide show. This depends on your photo settings. If several memory devices are
connected to the WM, the device will automatically display the photos from the most recently used device after turning on or exiting standby
mode. After turning the device on using the switch on the unit, the photos on the USB host will automatically be read.
You can choose between weather mode, photo mode, calendar mode, file mode and settings from the main menu.
1. Press the [M]-button on the back of the WM or the MENU-button on the remote control to open the main menu.
Menu
Weather
Photo
Calendar
File
Settings
2. Press the arrow buttons on the WM or remote control to make a selection.
3. Confirm your selection with the [
Description
Display in weather mode
Display in photo mode
Display in calendar mode with time
Display file menu
Display menu for individual settings.
] –button on the WM or the OK-button on the remote control.
EN - 8