Frontal Panel Description; Default Settings - C.P.A. EL 10cl Manual De Regulatión

ENGLISH

FRONTAL PANEL DESCRIPTION

GENERAL FUNCTIONS OF THE PUMP :
- 4 LANGUAGES MENU: ITALIAN, ENGLISH, FRENCH, SPANISH
- 3 POSSIBLE TYPES OF FUNCTIONING: MANUAL, ON/OFF, PROPORTIONAL
- ALARM TIME OF OVERDOSAGE
- START UP DELAY
- DEFAULT PARAMETER RESTORING
- WATER FLOW CONTROL
- LEVEL CONTROL
- STOP DOSING ( STAND_BY )
- REAL TIME FLOW RATE %

DEFAULT SETTINGS

 FUNCTIONING: ON-OFF
 SETPOINT: 1.20 ppM
 DIRECTION DOSING: Chlorination
 INJECTION FREQUENCY:100%(150 imp/min)
 ALARM TIME: 0unit (disabled)

START UP DELAY: 0 minutes
DEFAULT SETTINGS RESTORE
PUMP'S CONNECTION
Rev 3.0
1.Display LCD 8 x 2 backlight
2.Green Led: ▪ fix = PUMP ON
▪ blinking = PUMP IN ALARM
3.Red Led: indicates the injections
4.CAL button : ▪ allows to enter in programming
▪ saves the changes
5/6. – and + buttons : ▪ allows to navigate through the menu
7. ESC/SBY button: ▪ puts the pump in stand_by mode
Push and quickly release CAL button and then pressing + and – buttons
select "Restore Enter"
Push CAL to confirm the choice. The pump goes back in measure
restoring in memory
the default settings and calibrations parameters.
A - è il cavo di alimentazione elettrica , 230 V- 50Hz (a richiesta 115 ~).
B - è il connettore della sonda di livello (contatti 3 e 4). OPTIONAL
C - è il connettore del sensore di flusso (contatti 3 e 4). OPTIONAL
D - è il connettore BNC della sonda cloro
E - è l'interruttore ON_OFF. OPTIONAL
Cod. 00.008.255
▪ Modify the parameters values
▪ allows to exit the menu
8