BOB Duallie Manual De Instrucciones

Canopy Replacement
What you will need:
• Phillips Screwdriver
• Adjustable Wrench or 8 mm Wrench
• 4 mm Allen Wrench
Removing the Canopy
NOTE: It may be necessary for two
people to complete any step involving
both the front and rear of the stroller.
1. Set the parking brake (Fig. 1).
2. Open the two hook and loop
fasteners securing the canopy to the
stroller frame bar (Fig. 2).
3. Remove the screws that attach the
canopy to the handlebar.
NOTE: Set aside all parts removed in
this instruction for later use.
a. Place one finger on the lock nut
on the inner side of the handlebar
release lever (Fig. 3a). Hold the
locknut in place for the remainder
of this step.
b. Remove the screw from the
handlebar release lever (Fig. 3b)
and pull the canopy grommet
away from the handlebar.
c. Reinsert the screw into the
handlebar release lever, then hand
tighten.
NOTE: Replacing the screw keeps
the handlebar release lever from
coming apart.
4. Remove the two screws from each of
the four canopy stay brackets (Fig. 4).
5. Remove the front and rear canopy
stays from each of the four canopy
stay brackets (Fig. 5).
6. Using the screwdriver from the front
of the stroller (Fig. 6a) and a wrench
from the rear (Fig. 6b), remove the
two screws and nuts holding the seat
fabric together.
NOTE: Push the seats backs forward
from the rear of the stroller for easier
access with the wrench.
7. Remove the canopy from the stroller,
then remove the canopy stays from
the canopy (Fig. 7).
Pag e 1 o f 6
A: 08. 1 6
P045 2 9 7 0 0
Instructions / Instructions / Instrucciones
or
2
3b
Front Stay
Rear Stay
5
6b
BOB Duallie
®
1
3a
4
6a
7
BOB Ge ar by B rita x, 4140 P lea sa nt Road , For t M ill, S C 29 70 8
Cons ume r S er v ice : 888.427. 48 29 or 7 04 . 40 9. 1 69 9
© 2016 Br itax Child Sa fety , In c. A ll rights res er ve d.
Strollers
®
Front Stay
Rear Stay
w w w. B OB ge ar. c om