Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

KIT COMPONENTS
• A) Radio/climate control panel • B) Radio brackets • C) Tray • D) Storage pocket • E) Dummy panel • F) Climate control spacers
• G) (6) #8 x 3/8" Pan-head Phillips screws • H) (4) #8 x 5/8" Pan-head Phillips screws • I) (3) #8 x 1/2" Truss-head Phillips screws
A
B
F
®
Metra. The World's Best Kits.
Jeep Wrangler
Visit
MetraOnline.com
for more detailed information about the product and up-to-date vehicle
specific applications
KIT FEATURES
• ISO DDIN radio provision
• Complete center dash panel for a factory look
C
G
MetraOnline.com
1997-2002
D
E
H
I
© COPYRIGHT 2021 METRA ELECTRONICS CORPORATION
95-6549
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation ....................................................2-3
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: Visit metraonline.com for audio/
video and steering wheel control interface options.
Antenna Adapter: Not required
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 3/8' socket wrench • Cutting tool • Grinding tool
• 1/8" drill bit
Attention!
With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
REV. 8/5/21 INST95-6549

Publicidad

loading

Resumen de contenidos para Metra 95-6549

  • Página 1 Ensure that all installation connections are secure before cycling the ignition to test this product. ® Metra. The World’s Best Kits. MetraOnline.com © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 8/5/21 INST95-6549...
  • Página 2: Dash Disassembly

    DASH DISASSEMBLY KIT PREPARATION 1. Unclip the top cover from the instrument 1. Remove (4) Phillips screws securing the panel, then remove (2) Phillips screws climate control panel to the dash, then exposed. temporarily move it out of the way in preparation for the next step.
  • Página 3: Kit Assembly

    KIT PREPARATION KIT ASSEMBLY (CONT.) To the 95-6549 radio/climate control panel: 1. Secure the radio brackets to the radio using the screws supplied with the 6. Clip in the a/c vents. radio. (Figure A) 7. Clip in the cigarette lighter/switch panel.
  • Página 4 Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians ® Metra. The World’s Best Kits. MetraOnline.com © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 8/5/21 INST95-6549...
  • Página 5 Al probar el equipo del mercado de accesorios, asegúrese de que todo el equipo de fábrica esté conectado antes de encender el llave de encendido. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 8/5/21 INST95-6549...
  • Página 6: Desmontaje Del Tablero

    DESMONTAJE DEL TABLERO PREPARACIÓN DEL KIT 1. Desenganche la cubierta superior del 1. Quite los (4) tornillos Phillips que fijan panel de instrumentos. Después, quite el panel de control de clima. Después, los (2) tornillos Phillips expuestos. sáquelo temporalmente para quitarlo como preparación para el próximo paso.
  • Página 7: Ensamble Del Kit

    PREPARACIÓN DEL KIT ENSAMBLE DEL KIT (CONT.) Hacia el panel de control de clima / radio 95-6549: 1. Sujete los soportes del radio al radio con los tornillos incluidos con el mismo. 6. Enganche las rejillas de aire acondicionado. (Figura A) (Figura C) 2.
  • Página 8 Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow. Metra recomienda MECP técnicos certificados Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 8/5/21 INST95-6549...