Hkoenig homy90 Manual De Instrucciones página 12

The display shows a flashing "b".
9) Working with semiautomatic programs
Kneading dough
The automatic program starts with the kneading of the dough.
à The display shows the selected program permanently.
àThe duration of kneading process is shown at the display by a descending
time sequence. Additionally, the
Automatic water supply
After a short time, the amount of the water determined by the electronics is
automatically pumped into the kneading container via the water outlet.
The display shows symbol
Extruding dough
After the kneading process is finished, the appliance automatically starts
with extrusion of the dough.
è
A rotation bar lights up in the display during the extrusion of the dough.
è
Additionally, the symbol
Ventilation
Shortly after beginning of dough extrusion, the fan starts to work.
è
The display shows symbol
Efficient dough yield
The electronics recognizes whether there is still some dough left in the
kneading container and ensures a particularly high dough yield by the
repeating the kneading or extrusion process.
The last 10 seconds of the program are shown at the display in a descending
time sequence.
Automatic stop
After the program has ended, the appliance stops operating automatically.
This is indicated by a 3-time acoustic signal
The display shows "--:--"
Additionally, the symbol
NOTE: if no further button is pressed within 2 minutes, the appliance
switches back to operating mode. If again no further button is pressed within
the next 2 minutes, the appliance switches to standby mode.
Switching off the appliance
Press button ON/Standby, to switch the appliance to standby mode.
and appear.
appears
appears