Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EASY Touch
ELECTRIC UNDERFLOOR INSTALLATION
see numbering on diagram
1.
Connect to Fil Pilote (F.P.) - only for use in France
2.
Connect to Power Supply (Live – MAX 230V)
3.
Connect to Power Supply (Neutral – MAX 230V)
4.
Connect to heater(s) (Neutral – MAX 3600W/16
Amps)
5.
Connect to heater(s) (Live – MAX 3600W/16 Amps)
7.
Connect to 1st wire of floor sensor (colour not
important)
8.
Connect to 2nd wire of floor sensor (colour not
important)
(NOT USED)
MOUNTING THERMOSTAT
1.
Push excess wire back through the wall box and
insert thermostat back module into wall box
2.
Put fixing screws through mounting holes and
tighten
3.
Ensure that thermostat is straight before tightening
completely
4.
Replace thermostat front housing;
5.
Ensure front housing is securely fixed
6.
IMPORTANT: Tighten both retaining screws
i) align and sit front housing on to hinges,
ii) push lower half of front housing until a
'click' is heard.
4
Publicidad
Tabla de contenido
