Getting Started - Rointe EASY Touch Manual De Instrucciones

POWERING UP
You can now power up the thermostat and begin the programming process.
This is an Easy Setup guide. For full instructions please visit rointe.co.uk.

GETTING STARTED

In order to program the thermostat all you need to do is slide the Program Slide control from the top position to the bottom
position, customising the program along the way. If you make a mistake, return the Program Slide control to the previous position
and start again. In order to change a setting value, turn the Rotary Control. Pressing the Main Button will accept the value and
move you on to the next value that needs setting.
Your thermostat can be set to run a program, hold a fixed temperature, efficiently protect your home from freezing or standby. You
can select these modes by moving the Mode Slide control on the bottom of your thermostat.
Standby
Frost Protection
Manual
Auto
5
The thermostat will not come on.
NOTE: The thermostat is still connected to the mains electricity supply and your heating system is not isolated. Always
isolate from the mains before undertaking any maintenance.
The thermostat will not let the temperature fall below 5°C.
The thermostat will hold a fixed temperature. Just turn the Rotary Control to change the temperature.
In this position your thermostat will run the program you have set. If you would like to temporarily adjust the temperature,
just turn the Rotary Control. At the start of the next heating period, your thermostat will automatically resume your
programming schedule.