Charging The Device - Billow Technology ZX100x Manual Del Usuario

1. Configuration and use
1.1 On/Off
• Hold the button "On / Off" + "Play / Pause" button switch for three seconds
to turn the device.
• Do the same when you want to turn off the device.

1.2 Charging the device

For your first use you must first charge it for 4 hours.
For charging, connect to the speaker the micro USB cable and the other end
of this into a USB port of your PC or a power adapter that provides 5V and
1A maximum.
1.3 Bluetooth pairing
In the first use or pairing a new Bluetooth device, do the following:
1. Turn the unit as noted above, the blue indicator will start blinking.
2. Turn on the external Bluetooth device you want to pair with and start a
search for devices. When you start the synchronization it should show a new
Bluetooth device called ZX100x, select this and the devices will be linked.
Notes:
• When the devices are paired the blue LED stops flashing.
• In the event that you a requested to enter a pairing code, enter "0000".
1.4 Operation after pairing
1. Play music on your Bluetooth device connected as usual.
2. During playback:
• Hold the buttons "Previous Track" + (hold to decrease volume) or "Next
Track" + (hold for increased volume) to adjust the volume level.