Midland ENERJUMP WORK Manual Del Usuario página 13

CHARGE LEVEL INDICATOR
Press the switch button to check the battery level.
When charging, the indicator lights will fl ash one by one.
The number of steady indicator lights show the battery capacity:
Indicator lights No light
Battery capacity 0%
All indicator lights are off when charging is completed.
CHARGING ENERJUMP WORK
We recommend to fully charge Enerjump Work every 6 months.
• Plug the wall adaptor into the universal socket.
• Connect the 14V-1A input port of Enerjump Work to the other end of the wall charger.
or
• Plug the car adaptor into the socket of the cigarette lighter.
• Connect the 14V-1A input port of Enerjump Work to the other end of the car adaptor.
SMART JUMP START SYSTEM™
The device is supplied with special clamps with "Smart Jump Start System
They have the following features:
• Automatically protect the device against short circuits
• Automatically prevent the polarity inversion
This function is always active.
5 fl ashing 1 steady 2 steady
10% 20% 40%
3 steady 4 steady 5 steady
60% 80% 100%
".
TM
9