CASUALPLAY LiVi Manual De Instrucciones página 17

User Instructions
Unfolding (illustrations 1 - 4)
• Release the locking device situated on the left-hand bar of the chassis (fig. 1).
• Unfold the pushchair by pulling the handlebar upwards in a swift movement (fig. 2,
3 and 4).
Fitting the hood (illustration 5)
• Fit the hood by pressing the clips on both ends into the slots on the sides of the pushchair
(fig. 5). They will click when correctly fastened into place. To remove the hood, press the
tab upwards and pull forwards.
Folding (illustrations 6-11)
• Fold the hood forwards (fig.6).
• Hold the folding button on the handlebar down (a), and at the same time, press the side
button (b) (fig.7). Push the handlebar downwards (fig.8).
• Fold the chassis to the position shown in figure 9.
• Press the folding handle and pull upwards (fig.10).
• Fasten the locking device to prevent the pushchair from coming open accidentally
(fig.11).
Parking brake functioning (illustration 12)
• To put the brake on press the pedal between the rear wheels downwards.
• To release the brake, pull the pedal upwards.
Adjusting the safety harness (illustrations 13-14)
• The harness has a chest section (3 positions) and an abdominal section (2 positions),
both of these sections need to be adjusted to fit the child properly.
• For the chest section, pass the harness buckles through the vents in the seat and the
upholstery (fig.13).
• Choose the position to fit the child, bearing in mind that both straps should be at the
same level.
• Insert the buckles through the slots, making sure the harness straps are not twisted.
NOTE: Access the buckles through the opening in the upholstery,
found on the top rear part of the backrest.
15