CASUALPLAY LiVi Manual De Instrucciones página 20

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 3
• Line the anchors of the SONO, BABY 0+ or NUNO/FOLK up with the slots of the LIVI
adaptors (fig.28).
• Press downwards until you hear it click into place, and a green signal appears in each of
the side windows of the anchors (fig.29).
WARNING: Check that the fastening devices are correctly
engaged before using the product.
• To remove the SONO, BABY 0+ or NUNO/FOLK press and then release the red button
on both anchors. A red signal will appear in each of the side windows (fig.30).
• Next, pull upwards to release it from the pushchair chassis.
Basket
• The basket is clipped onto the lower part of the chassis, to remove the basket simply
undo the clips and take it off.
• The maximum weight the basket can hold is 2.5 kg.
• It is advisable to empty the basket before folding the pushchair.
Maintenance
• Regularly grease the mobile parts with a lubricating product (not grease or oil).
• Inspect the brakes, harness, clips and mechanisms that may become loose or
suffer from wear and tear over time.
• Clean the chassis with a damp cloth (never use abrasive products or solvents).
• Use a sponge with warm water and a mild detergent on the plastic parts.
• Following the washing instructions for the textile parts of the pushchair, leave
them to dry fully before folding the pushchair. Do the same if the pushchair has
been exposed to damp conditions to prevent mould from forming.
• Do not use accessories that have not been approved by the manufacturer.
18

Publicidad

Tabla de contenido
loading

Tabla de contenido