01
Getting started
Setting the sleep timer
The sleep timer switches off the system after a
specified time so you can fall asleep without
worrying about it.
•
Press SLEEP repeatedly to select an option
then press ENTER .
Choose between the following options:
• SLP AUTO – Switches off automatically
after the currently playing CD, Video CD or
DivX disc has finished.
• SLP ON – Switches off after about an hour
• SLP OFF – Cancels the sleep timer
After selecting SLP ON, you can press SLEEP
again to check how much time is left. Each line
indicates approximately 12 minutes
(remaining):
S L P - - - - -
Dimming the display
You can choose to dim the display if you find it
too bright.
1
Press SHIFT+SYSTEM SETUP .
2
Use
(cursor left/right) then ENTER
to choose the dimmer setting.
This is shown in the front panel display.
3
Use
(cursor up/down) to select
LIGHT or DARK then press ENTER.
Note
1 The display dims when the sleep timer is set.
2 Sleep Auto will not work with WMA/MP3 discs, Video CD/Super VCDs during PBC playback, or CDs in repeat play.
10
En
1
2