Tabla de contenido
Publicidad
Operation
8
Setting your Camera
For SONY cameras:
the XMTR to trigger compatible slave units, the cameras flash mode must be set to either Fill
Flash, Auto Flash, Slow Flash or Rear-Curtain Flash. The XMTR will not trigger compatible
slave units if the cameras flash mode is set to Wireless Lighting mode.
For NIKON cameras:
Go to: Custom Settings Menu - Bracketing/Flash - 1/250s Auto FP (turn on).
Channel Select
1.
Press the CHN/SET button to active channel select. Active channel flashes.
2.
Use the scroll wheel to select required channel.
3.
Press the CHN/SET button to confirm.
Group Settings
To select individual groups:
1.
Press the GRP/SELECT button to select group. Active group flashes.
2.
Single press GRP/SELECT to select next group, double press to select previous group.
3.
Press the CHN/SET button to confirm.
To select all groups:
1.
Press and hold the GRP/SELECT button to select all groups. Active groups flash.
2.
Use the scroll wheel to adjust the flash power. Flash power ratios of all selected groups
will adjust proportionally.
3.
Press the CHN/SET button to confirm.
Flash Mode Setting
1.
Press the GRP/SELECT button to select group. Active group flashes.
2.
Single press GRP/SELECT to select next group, double press to select previous group.
3.
Press the MDE button to change the flash mode (TTL, Flash, Off).
4.
Press the CHN/SET button to confirm.
Flash Power Setting
1.
Press the GRP/SELECT button to select group. Active group flashes.
2.
Use the scroll wheel to adjust the flash power.
3.
Press the CHN/SET button to confirm.
Modelling Lamp
1.
Double press the CHN/SET button to turn the modelling on/off.
Before using the XMTR first set the cameras flash mode. In order for
To enable High-Speed Sync using the XMTR you must turn on Auto FP.
Publicidad
Tabla de contenido
