Unpacking Instructions; Safety Instructions - TECshow NAVIGATOR SPLIT RDM Manual De Usuario

2. WARNING
For your own safety, please read this
user manual carefully before your ini-
tial start-up!

Unpacking Instructions

Immediately upon receiving this product, careful-
ly unpack the carton and check the contents to
ensure that all parts are present, and have been
received in good condition.
Your shipment includes
• Navigator Split RDM
• Pro power cable (1,4m)
Caution! Keep this device away from
rain and moisture! Unplug mains lead
before opening the housing!

Safety Instructions

Every person involved with the installation, opera-
tion and maintenance of this device has to:
• be qualified
• follow the instructions of this manual
Caution! Be careful with your opera-
tions. With a dangerous voltage you can
suffer a dangerous electric shock when
tourching the wires!
Before your initial start-up, please make sure that
there is no damage caused by transportation.
Should there be any, consult your dealer and do not
use the device.
To maintain perfect condition and to ensure a safe
operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes
written in this manual.
This device contains no user-serviceable parts.
Refer servicing to qualified technicians only.
Important
• Never let the power cord come into contact
with other cables! Handle the power cord and
all connections with the mains with particular
caution!
• Never remove warning or informative labels
from the unit.
• Never use anything to cover the ground contact.
• Never look directly into the light source.
• Never leave any cables lying around.
• Never use the device during thunder storms,
unplug the device immediately.
• Never leave various parts of the packaging
(plastic bags, polystyrene foam, nails, etc.)
within children's reach, as they are potential
sources of danger.
• Do not insert objects into air vents.
• Do not open the device and do not modify the
device.
• Do not connect this device to a dimmer pack.
• Do not shake the device. Avoid brute force
when installing or operating the device.
• Do not switch the device on and off in short
intervals, as this would reduce the system's life.
• Do not touch the device's housing bare-handed
during its operation (housing becomes hot).
• Only use device indoors, avoid contact with
water or other liquids.
• Only operate the device after having familiar-
ized with its functions.
• Only install the device with the hanging-bracket.
• Avoid flames and do not put close to flammable
liquids or gases.
• Always keep case closed while operating.
• Always allow free air space of at least 50 cm
around the unit for ventilation.
• Always disconnect power from the mains, when
device is not used or before cleaning! Only han-
dle the power cord by the plug. Never pull out
the plug by tugging the power cord.
English version
P. 3
| Tecshow Navigator Split RDM