Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
a.
LOW – Low heat (1200W)
b.
HIGH – High heat (2000W)
c.
LOW SWING – Low heat oscillation (1200W)
d.
HIGH SWING – High heat oscillation (2000W)
3.
Turn the temperature control dial until you hear a click – this will turn the unit on.
Continue turning the dial to your desired temperature. The temperature control
dial acts as a thermostat. Once the room has reached the desired temperature
the unit will switch off.
SWITCHING OFF
1.
Turn the power dial to the OFF position.
2.
Turn the temperature control dial anticlockwise to the lowest setting.
3.
Remove the power plug, store the heater after the unit has cooled down.
MAINTENANCE, CLEANING AND STORAGE
Warning! Always disconnect the mains power supply before cleaning the unit.
1.
Use a soft dry cloth to clean the surface of the product. Wipe dry with a clean
cloth.
2.
Use warm water with a mild detergent and a soft damp cloth to clean the product.
Wipe dry with a clean cloth. Do not pour water onto or into the unit.
3.
Clean the air inlet and outlet grills regularly with a vacuum cleaner, using the brush
attachment.
4.
To store your product out of season, we recommend using the original (or
appropriately sized) box. It is important to keep it in a safe, dry location.
NOTE
-
Overheat protection: When the temperature of the heater is too high, the thermo-
stat will automatically switch off the power and the heater will stop working. After
the heater has cooled, the heater can be used normally. This may occur during
improper use or certain environment conditions.
-
Tip-over protection: When the heater is knocked over or tipped onto its side, the
safety switch will automatically cut off power. Power will return to normal when
the unit has been placed upright onto an even surface.
3 | English
Publicidad
Tabla de contenido
