CONTROL PANEL
When the appliance is plugged into the mains socket, the power indicator light
illuminate.
Setting the Temperature
The freezer temperature can be adjusted by turning the temperature control knob.
Temperature change: Min Med Max (Coldest)
Normally it is recommended to turn the knob to the "Med" position.
The temperature will be affected by where the freezer is located, how often the door is opened and the
temperature of the room the freezer is located in.
Alarm
The appliance has been fitted with a warning system which ensures that the temperature in the freezer
cannot rise unnoticed.
An alarm will beep and the alarm indicator light Alarm will flash if the temperature reaches or exceeds
‐10°C. After about 2 minutes the alarm will automatically stop and the alarm indicator light will stop
flashing. Depending on the temperature in the freezer, you should check the condition of the food.
To switch the alarm off early
The alarm indicator light will go out when the temperature goes below ‐10°C. However, if the alarm
disturbs you, you can switch it off by pressing
The alarm will stop.
The alarm indicator light will stay on until the correct temperature has been reached.
Super Freeze
Switch the super freeze function on before putting fresh food into the freezer.
This will help food to freeze quickly and retain its nutrients, vitamins, flavours and appearance.
It is recommended not to use the super freeze function when:
- putting the food that is already frozen.
- freezing the small quantities of fresh food daily.
To switch on super freeze
Press Super Freeze. The super freeze indicator light Super will illuminate.
.
7
will
7