Overview And Use; Safety Instructions; System Safety; Closing Valve For Water Supply - Nilfisk FOOD Yeti TW Instrucciones De Uso

4. Overview and Use

The Yeti unit is a complete cleaning station to be con-
nected to tap water, mixing station, a booster unit or
a main station. The unit requires sufficient supply of
water, compressed air and detergent.
Consumptions:
The unit is approved for the use of detergents or
disinfectants.
Warning: Do not change the settings
made or recommended by the supplier
of the detergents!
Detergents are supplied via a User Pack system or
from separate standard cans. Supply is also possible
via piping systems.
Before installation and set up of the unit always
read this instruction thoroughly. Always make sure
to follow personal safty procedures for chemicals in
connection with refilling procedures (product change),
maintenance and repair. See also product label and
MSDS sheet.

Safety instructions

Only professional service personnel are allowed to
carry out service and repairs on the unit.
Only instructed personnel are allowed to operate the
unit.
Fig 1.1

5. System Safety

In case of error/defect or service on equipment:
1. close the water supply
(must be installed by customer)
2. close the air supply

5.1. Closing valve for water supply.

With this valve the unit can be isolated from the water
supply. Further, a non-return valve is built in the block
to prevent backflow of water.
Water supply
13