LaserLiner Centurium 410S Manual De Instrucciones página 21

Slope function up to 5° – horizontal
This function deactivates the automatic sensor. Press the auto/man button to
activate the function and select the X or Y axis. The plus/minus buttons are
used to re-adjust the slope by means of a motor. In the process the X- and
Y-axis can be adjust separately. Refer to the illustrations below.
– X or Y LED permanently on: Manual alignment
!
– X or Y LED flashing individually: Adjustment mode
Slope function up to 5° – vertical
When the 5° maximum slope range has been reached, the laser will
!
stay fixed and blink. The X/Y LEDs additionally flash alternately. In this
case, reduce the slope angle.
man X axis
X
man
X
Centurium
Y axis
± 5°
Y
Y
GB
21