Displaying The Picture File On The Full Screen; Protecting An Important File; Rotating A Picture File; Registering A File As The Startup Picture - Sony VPD-MX10 Manual De Instrucciones

Displaying the Picture File on the Full Screen

Select the picture file and "Full Screen", then press the ENTER key.
The selected picture is displayed on the full screen.
When you want to start the slide show from the selected picture, press the
following keys.
,/m: to display the next slide (the index screen is displayed after the last
</M: to display the previous slide (the index screen is displayed after the
MS SLIDE/ENTER: to return to the index screen
Note
The slideshow setting is notavailable.

Protecting an Important File

After selecting the file you want to protect, set "Protect" to "On" or "All
On". When a file is protected, the protect mark is displayed.

Rotating a Picture File

After selecting the file you want to rotate, set "Rotate". The picture rotates
90° every pressing of the ENTER key.
Notes
• When the file you want to rotate is protected, you can not rotate it. Rotate after
releasing the protect.
• When the write-protect tab on the Memory Stick has been set to LOCK, you can
erase the picture.

Registering a File as the Startup Picture

You can register a picture file in the Memory Stick as the startup picture
file which is displayed when the power is turned on.
Set "Str. up" to "Entry". When the file is registered, the startup mark is
displayed.
When you want to use the registered picture file as the startup file, set
"Startup" of the SETTING screen to "Custom" (see page 21.)
Note
As the setting of "Custom" is memorized in the Memory Stick, when you
want to use the registered picture file as the startup file, insert the Memory
Stick in the projector before turning on the projector.
18
GB
Operating the Picture File
picture file.)
first picture file.)