Projecting A Selected File When The Power Is Turned On - Startup - Sony VPD-MX10 Manual De Instrucciones

Projecting a Selected File When the
Power is Turned on — Startup
When the power is turned on, the selected picture file is projected for about
one minute.
When you want to use the registered picture file as the startup file, you must register a
picture file as the startup file in the index screen (see page 18.)
1
Select "SETTING" in the MS home, then press the ENTER key.
2
Select "Startup", then press the ENTER key.
3
Select the item, then press the ENTER key.
Original: select the original picture memorized in the projector.
Custom: select the picture file registered in the index screen which is saved
Off: when you do not set the startup.
Notes
• When you want to clear the startup screen while displaying it, press the M/
m/</, or ENTER key.
• When you want to use the registered file, insert the Memory Stick where
the registered file is saved in the projector, then turn on the power.
• You can register one startup file per one Memory Stick.
Projecting a Selected File When the Power is Turned on — Startup
SETTING
Autorun: On
Startup: Original
The original picture cannot be changed.
in the Memory Stick
Original
Custom
Off
21
GB