LaserLiner PowerPlane-Laser 3G Manual De Instrucciones página 14

4
Slope mode
Do not release the transport restraint, set slide switch (3) to the mid-position and
select the lasers with the selector switch. Sloping planes and tilts can now be
measured. In this mode, the laser lines no longer align automatically. This is
signalised by the laser lines flashing. In addition, the LED light (8) remains red.
LASER
5
Hand receiver mode
Optional: Working with the laser receiver GRX
Use an GRX laser receiver (optional) to carry out
levelling at great distances or when the laser
lines are no longer visible. To work with a laser
receiver, switch the line laser to hand-held
receiver mode by keeping button 7 (hand-held
receiver mode on / off) pressed. The laser lines
will now pulsate with high frequency, making
the laser lines darker. The laser receiver can
detect these pulsating laser lines.
!
Observe the laser receiver's operating
instructions for line lasers.
Due to the special optics required to generate a continuous 360° laser
!
line, the underlying technology may cause differences in brightness in
different areas of the line. This may lead to different ranges in hand
receiver mode.
14
GB
LASER LASER LASER LASER