Proline GR800 Manual De Instrucciones página 13

Sleep operation
The sleep function adjusts the set temperature of the appliance to the thermal needs of the body falling
asleep.
Press to operate the sleep mode. The sleep indicator will appear on the remote display.
The set temperature will increase 1°C after half an hour and a further 1°C (2°F) after 1 hour.
NOTE: This function is unavailable in fan only and dehumidification modes.
To cancel the function, press
Regulating air flow direction
Move the horizontal louvers directly to
adjust the air flow.
Lock (remote control only)
+ –
Press and at the same time to lock current settings and prevent accidental changes. Once locked,
remote will not respond to any actions. The lock indicator will appear on the remote display.
+ –
Press and at the same time again to unlock. The lock indicator will disappear on the remote display.
Changing the temperature display (remote control only)
In the standby state, press
to Fahrenheit and vice versa.
DRAINAGE
Under high humidity conditions it may be necessary to empty the internal water tank. When the internal
water tank is full the display will show "H8" and the indicator
The cooling/dehumidification process will stop.
Before the appliance is turned on,
the supplied drain hose to the drainage point.
. The sleep indicator will disappear on the remote display.
–
and MODE at the same time to change the temperature display from Celsius
you can insert the rubber plug to the bottom drainage point or attach
will flash.
11